CM-5

Reflectance: di:8°, de:8°(diffuse illumination: 8° viewing)
SCI/SCE switchable
Conforms to CIE No. 15, ISO 7724/1, ASTM E 1164, DIN 5033 Teil7, and JIS Z 8722(Condition c)

Transmittance: di:0°, de:0°(diffused illumination/0° viewing)

Dual 40-element silicon photodiode arrays

360 to 740 nm

10nm

Approx. 10nm 

0 to 175%(Reflectance or transmittance), Output/display resolution: 0.01%

Φ152mm

Pulsed xenon lamps

Approx. 1 seconds(to data display/output);

Minimum measurement interval: Approx. 3s

Changeable by changing mask and settings.
LAV: Φ30mm

MAV: Φ8mm(Optional)

SAV: Φ3mm(Optional)

Transmittance: Φ20mm

Spectral reflectance: Standard deviation within 0.1%(400~700nm)
Chromaticity Value: Standard deviation within ΔE*ab 0.04
* When a white calibration plate is measured 30 times at 10-seconds intervals after white calibration

Within ΔE*ab 0.15(Typical) I (Based on 12 BCRA Series II color tiles compared to values measured with a master body at 23℃)

No sides(unlimited sample length); Depth(maximum sample thickness): 60mm
Sample holder(optional) for holding sheet samples or containers of liquid samples can be installed/removed

14.5cm TFT Color LCD

Automatic white calibration(reflectance) / 100% calibration(transmittance) using internal white calibration plate

USB 1.1(Connection to PC; USB memory stick); RS-232C Standard(Connection to Serial Printer)

2° Standard Observer or 10° Standard Observer

A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12, ID50, ID65(simultaneous evaluation with two light sources possible)

Spectral values, spectral graph, colormetric values, color-difference values, color-difference graph, pass/fail judgment, pseudo color, color assessment

L*a*b*, L*C*h, Hunter Lab, Yxy, XYZ, Munsell, and color differences in these spaces(except for Munsell)

Reflectance: MI; WI(ASTM E 313-73, ASTM E 313-96); YI(ASTM E 313-73, ASTM E 313-96, ASTM D 1925); ISO Brightness, B(ASTM E 313-73)

Transmittance: Gardner, Iodine, Hazen(APHA), European Phamacopoeia, US Phamacopeia

User-defined index

ΔE*ab(CIE 1976), ΔE*94(CIE 1994), ΔE00(CIE 2000), ΔE(Hunter), CMC(I:c)

Tolerances can be set to colorimetric values(except Munsell), color-difference values, or reflectance index values

Sample data: 4000 measurements; Target color data: 1000 measurements

Storage of measurement data and target color data. Storage/reading of measurement condition settings(Security-en-abled USB memory sticks cannot be used)

AC 100 to 240V 50/60Hz (using included AC adapter)

13 to 33℃, relative humidity 80% or less(at 33℃) with no condensation

​

0 to 40℃, relative humidity 80% or less(at 35℃) with no condensation

​

385(W) x 192(H) x 261(D), I Slide cover open: 475(W) x 192(H) x 261(D)